Auto Power-Off
Auto Power-Off is automatically enabled by default when you turn on the printer. When Auto Power-Off is
enabled, the printer will automatically turn off after two hours of inactivity to help reduce energy use. You can
change the Auto Power-Off setting from the printer software. Once you change the setting, the printer will
Chapter 9
42
Technical information
maintain the setting that you choose.
Auto Power-Off turns the printer off completely, so you must use the
power button to turn the printer back on.
To enable or disable Auto Power-Off
1.
Click the HP Deskjet 2510 series desktop icon to open the Printer Software.
NOTE:
You can also access the Printer Software by clicking
Start > Programs > HP > HP Deskjet 2510
series > HP Deskjet 2510 series
2.
In the Printer Software, click
Print & Scan
and then click
Maintain Your Printer
to access the
HP Deskjet
2520 series Toolbox
.
3.
The
HP Deskjet 2520 series Toolbox
appears.
4.
Click
Advanced Settings
. Follow the onscreen instructions.
TIP:
If you are printing through a wireless or Ethernet connection over a network, Auto Power-Off should be
disabled to ensure that print jobs do not get lost. Even when Auto Power-Off is disabled, the printer enters a
Sleep mode after five minutes of inactivity to help reduce energy use.